Bryston - BP 6

The Bryston BP-6 C-Series preamplifier is a simplified state of the art preamplifier offering 4 high level stereo inputs. Bryston's BP-6 combines outstanding function with complete musical accuracy. It provides an exact duplication of the original recording experience, without distortion or coloration. Bryston proprietary Class A Discrete Operational Amplifiers are used throughout. All signal circuitry is fully discrete to avoid the compromises, phase shift and nonlinearities inherent in IC's. Controls are practical and convenient: source switching, tape monitoring, mute, balance and volume.

The BP-6 features four high level inputs. Output is provided by two pair of single-ended RCA outputs. A headphone output on the front panel allows for monitoring and private listening.

A motor driven volume up/down hand held remote control is also available as an option if required. No internal wiring is designed into Bryston's preamp circuitry. Components plug directly into boards, eliminating variations in signal travel and wire interaction. Volume controls are laser trimmed to within 1/4 dB accuracy for a firm image balance between the left and right channels.

Low output impedance and high current availability allow you to run long cables between the preamp and power amp without any loss of frequency response, so you can position your amp as close to your speakers as possible. The BP-6 is also available with an optional internal MM Phono Stage (BP-6P) input or our now famous Digital (DAC) input BP-6 DA if required. The BP-6DA has a coaxial S/PDIF digital input . Anyone who is tired of the marginal sound quality coming from the analog outputs of their CD or DVD player should strongly consider this system. The Bryston DAC provides an easy upgrade path that will substantially increase the resolution of your audio system.
 

Technische Daten:

Frequency Response: 20Hz - 20kHz +/- .05dB
Maximum Output: 15 volts
IM orTHD:  Less than 0.005% at 3 volts out
HighLevelSensitivity : 500mVRatedNoise:Ref. 500mV20-20kHz - 100dB
Features:
4 stereo RCA inputs
3 with DAC option
1 stereo RCA output
1 stereo tape loop
Headphone output
Gold plated switch
contacts and connectors
Optional remote, volume and mute
Optional MM phono stage
Optional DAC
AmplifierWatts: 60 watts per channel, 8 ohms, 100 watts per channel, 4 ohms
Harmonic Distortion: Less than 0.01% from 20Hz to 20kHz at 60 watts
IM Distortion: Less than 0.01% from10 milliwatts to 60 watts
Noise: 106dB below full output
Slewing Rate: Greater than 60 volts per microsecond
Power Bandwidth: 5Hz to over 100kHz
Damping Factor:Over 500 at 20Hz, ref. 8 ohms
Input Sensitivity: 775 Volt in for full output 50k input impedance
Each channel employs completely independent power supply
Will deliver full output to any phase angle at 4 ohms or higher
Pre-out/main-in connectors
Dimensions: 19 or 17 x 2.25 x 10.5 inches, 48.26 or 43.18 x 5.72 x 26.67 cm
wt: 19 lbs, 8.5 kg

UVP: 2.745,-€ pro Stück  (4 Hochpegel-Eingänge, 2 Ausgänge)