Linn - Majik I

Produktinformation vorab nur in englisch:

Majik-I is a combined pre- and power amplifier housed in one compact unit. It sets a new performance benchmark for integrated amplifiers by marrying audio circuitry derived from Linn’s Klimax Kontrol with Chakra power amplification.

Majik-I uses high performance audio circuitry derived from Linn’s flagship Klimax products, designed to preserve the integrity of the source audio signal with outstanding efficiency.

Majik-I features six stereo source inputs, including one for a turntable, along with an input for a portable music player and a headphone socket on the front panel.

Linn’s Chakra amplification offers increased power, reliability and efficiency, less heat and lower distortion than other amplifier designs. Chakra amplification also deploys Linn’s proprietary hum and buzz-free Switch Mode Power Supply technology for superior mains noise isolation and efficiency to generate stable, clean power for the audio circuitry.

Majik-I is the ideal foundation on which to build your hi-fi system over time, for example by multi-amping or going fully Aktiv.

Majik-I is the perfect partner for Linn’s Majik CD player, combining premium audio performance with unbeatable value.

KEY FEATURES INCLUDE

• 6 stereo inputs including a configurable phono input (MM or line level, upgradeable to MC)
• 2 channels of 100W Linn Chakra power amplification
• Auxiliary input on front panel for easy connection to portable music players
• Accommodates Linn Aktiv crossover cards

MAJIK-I
TECHNICAL SPECIFICATION

Integrated amplifier

Date of Introduction

• October 2007

Type

• Integrated amplifier

Connector types

• Headphones 3.5 mm jack
• Aux input 3.5 mm jack
• Line outputs RCA Phono
• Tape outputs RCA Phono
• Line inputs RCA Phono
• Speaker outputs 4mm Banana / Binding Post

Input impedance

• MM phono input 48 kΩ 68 pF
• Line inputs 10 kΩ
• Aux input 100 kΩ

Input voltage

• MM phono input 70 mV peak @ 1 cm/sec 1kHz
• Line inputs 8.5 V peak, 6 V rms
• Aux input 4.5 V peak, 3.1 V rms

Phono stage gain

• MM phono input +40 dB (x 100) @ 1 kHz

Output impedance

• Line out 300 Ω
• Tape out 300 Ω
• Headphones 11 Ω

Output voltage

• Line outputs 8.8 V peak, 6 V rms
• Tape outputs 8.8 V peak, 6 V rms
• Headphones 8.8 V peak, 6 V rms

Output offset

• Line outputs < 2 mV
• Tape outputs < 2 mV
• Headphones < 2 mV
• Speaker outputs < 3 mV

Signal-to-noise ratio

• Line inputs Better than -120 dB
• MM phono input Better than -90 dB

Gain range

• -80 dB to +20 dB

Gain resolution

• 0.5 dB

Unity gain volume

• 0 dB = volume 80

Dynamic range

• 120 dB

Damping factor

• Greater than 170

Signal level for clipping

• 755 mV rms

Harmonic distortion

• < 0.01%

Load tolerance

• Unconditionally stable into all loudspeaker loads

Frequency response

• Pre-amp 2.5 Hz – 170 kHz (-3 dB)
• Power amp 2.5 Hz – 48 kHz (-3 dB)

Speaker output voltage

• 28.8 V peak

Power consumption

• Standby 20 W
• Operational 30 W
• Maximum continuous 300 W

Mains supply voltage

• 100 – 120 V ac (±10%) 50 – 60 Hz
• (auto-ranging) 220 – 240 V ac (±10%) 50 – 60 Hz

Fuse replacement

• 250 V, T10 A

Dimensions

• (H) 80 mm x (W) 381 mm x (D) 355 mm
• (H) 31⁄8 inches x (W) 151⁄16 inches x (D) 14 inches
• Weight 4.9 kg / 10.78 lb

Control

• 6 control keys on front panel
• Remote controllable (handset supplied)

Finishes

• Black and Silver